[ gelöst ] UMTS stick Suse 13.1 umtsmon

kirasam · 19 Dez. 2013

Hallo wirrwarr

Hat leider nicht funktioniert .

hier die Ausgabe von var/log/messages

Code:

013-12-19T21:36:41.779480+01:00 linux-itza su: pam_unix(su:session): session opened for user root by uli(uid=1000)
2013-12-19T21:36:41.784807+01:00 linux-itza su: pam_systemd(su:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR
2013-12-19T21:36:54.344829+01:00 linux-itza sudo:     root : TTY=pts/3 ; PWD=/home/uli ; USER=root ; COMMAND=/sbin/modprobe usbserial vendor=0x1c9e product=0x9801
2013-12-19T21:36:54.353711+01:00 linux-itza sudo: pam_unix(sudo:session): session opened for user root by uli(uid=0)
2013-12-19T21:36:54.367326+01:00 linux-itza sudo: pam_systemd(sudo:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR
2013-12-19T21:36:54.417036+01:00 linux-itza kernel: [ 1257.319343] usbcore: registered new interface driver usbserial
2013-12-19T21:36:54.417088+01:00 linux-itza kernel: [ 1257.319393] usbcore: registered new interface driver usbserial_generic
2013-12-19T21:36:54.417094+01:00 linux-itza kernel: [ 1257.319431] usbserial: USB Serial support registered for generic
2013-12-19T21:36:54.421145+01:00 linux-itza sudo: pam_unix(sudo:session): session closed for user root
2013-12-19T21:37:07.070988+01:00 linux-itza kernel: [ 1269.973203] usb 1-3: new high-speed USB device number 2 using ehci-pci
2013-12-19T21:37:07.189028+01:00 linux-itza kernel: [ 1270.090387] usb 1-3: New USB device found, idVendor=1c9e, idProduct=98ff
2013-12-19T21:37:07.189080+01:00 linux-itza kernel: [ 1270.090404] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-19T21:37:07.189086+01:00 linux-itza kernel: [ 1270.090411] usb 1-3: Product: USB Modem
2013-12-19T21:37:07.189090+01:00 linux-itza kernel: [ 1270.090418] usb 1-3: Manufacturer: USB Modem
2013-12-19T21:37:07.189095+01:00 linux-itza kernel: [ 1270.090424] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-19T21:37:07.335573+01:00 linux-itza mtp-probe: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-19T21:37:07.337607+01:00 linux-itza mtp-probe: bus: 1, device: 2 was not an MTP device
2013-12-19T21:37:07.387983+01:00 linux-itza kernel: [ 1270.290966] usb-storage 1-3:1.0: USB Mass Storage device detected
2013-12-19T21:37:07.394012+01:00 linux-itza kernel: [ 1270.296617] scsi6 : usb-storage 1-3:1.0
2013-12-19T21:37:07.394035+01:00 linux-itza kernel: [ 1270.296867] usb-storage 1-3:1.1: USB Mass Storage device detected
2013-12-19T21:37:07.394039+01:00 linux-itza kernel: [ 1270.296951] scsi7 : usb-storage 1-3:1.1
2013-12-19T21:37:07.395970+01:00 linux-itza kernel: [ 1270.297868] usbcore: registered new interface driver usb-storage
2013-12-19T21:37:08.274810+01:00 linux-itza usb_modeswitch: switching device 1c9e:98ff on 001/002
2013-12-19T21:37:08.401400+01:00 linux-itza kernel: [ 1271.301563] scsi 7:0:0:0: Direct-Access     USBModem Disk             2.31 PQ: 0 ANSI: 2
2013-12-19T21:37:08.402984+01:00 linux-itza kernel: [ 1271.305590] sd 7:0:0:0: Attached scsi generic sg2 type 0
2013-12-19T21:37:08.406019+01:00 linux-itza kernel: [ 1271.308150] sd 7:0:0:0: [sdb] Attached SCSI removable disk
2013-12-19T21:37:08.680576+01:00 linux-itza kernel: [ 1271.582073] usb 1-3: USB disconnect, device number 2
2013-12-19T21:37:08.992986+01:00 linux-itza kernel: [ 1271.895068] usb 1-3: new high-speed USB device number 3 using ehci-pci
2013-12-19T21:37:09.108015+01:00 linux-itza kernel: [ 1272.010603] usb 1-3: config 1 has an invalid interface number: 5 but max is 4
2013-12-19T21:37:09.108062+01:00 linux-itza kernel: [ 1272.010620] usb 1-3: config 1 has no interface number 4
2013-12-19T21:37:09.111780+01:00 linux-itza kernel: [ 1272.013601] usb 1-3: New USB device found, idVendor=1c9e, idProduct=9801
2013-12-19T21:37:09.111831+01:00 linux-itza kernel: [ 1272.013615] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-19T21:37:09.111837+01:00 linux-itza kernel: [ 1272.013623] usb 1-3: Product: USB Modem
2013-12-19T21:37:09.111842+01:00 linux-itza kernel: [ 1272.013630] usb 1-3: Manufacturer: USB Modem
2013-12-19T21:37:09.111846+01:00 linux-itza kernel: [ 1272.013636] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-19T21:37:09.157041+01:00 linux-itza kernel: [ 1272.059635] usbserial_generic 1-3:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-19T21:37:09.157087+01:00 linux-itza kernel: [ 1272.059648] usbserial_generic 1-3:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-19T21:37:09.157092+01:00 linux-itza kernel: [ 1272.059655] usbserial_generic 1-3:1.0: generic converter detected
2013-12-19T21:37:09.159545+01:00 linux-itza kernel: [ 1272.061974] usb 1-3: generic converter now attached to ttyUSB0
2013-12-19T21:37:09.159586+01:00 linux-itza kernel: [ 1272.062201] usbserial_generic 1-3:1.1: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-19T21:37:09.159592+01:00 linux-itza kernel: [ 1272.062209] usbserial_generic 1-3:1.1: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-19T21:37:09.159598+01:00 linux-itza kernel: [ 1272.062215] usbserial_generic 1-3:1.1: generic converter detected
2013-12-19T21:37:09.160989+01:00 linux-itza kernel: [ 1272.063401] usb 1-3: generic converter now attached to ttyUSB1
2013-12-19T21:37:09.161024+01:00 linux-itza kernel: [ 1272.063613] usbserial_generic 1-3:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-19T21:37:09.161028+01:00 linux-itza kernel: [ 1272.063620] usbserial_generic 1-3:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-19T21:37:09.161033+01:00 linux-itza kernel: [ 1272.063627] usbserial_generic 1-3:1.2: generic converter detected
2013-12-19T21:37:09.163007+01:00 linux-itza kernel: [ 1272.064376] usb 1-3: generic converter now attached to ttyUSB2
2013-12-19T21:37:09.163046+01:00 linux-itza kernel: [ 1272.064661] usbserial_generic 1-3:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-19T21:37:09.163052+01:00 linux-itza kernel: [ 1272.064668] usbserial_generic 1-3:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-19T21:37:09.163057+01:00 linux-itza kernel: [ 1272.064674] usbserial_generic 1-3:1.3: generic converter detected
2013-12-19T21:37:09.164107+01:00 linux-itza kernel: [ 1272.066477] usb 1-3: generic converter now attached to ttyUSB3
2013-12-19T21:37:09.164133+01:00 linux-itza kernel: [ 1272.066851] usbserial_generic 1-3:1.5: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-19T21:37:09.164138+01:00 linux-itza kernel: [ 1272.066859] usbserial_generic 1-3:1.5: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-19T21:37:09.164143+01:00 linux-itza kernel: [ 1272.066865] usbserial_generic 1-3:1.5: generic converter detected
2013-12-19T21:37:09.165975+01:00 linux-itza kernel: [ 1272.067491] usb 1-3: generic converter now attached to ttyUSB4
2013-12-19T21:37:09.182385+01:00 linux-itza mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-19T21:37:09.188164+01:00 linux-itza mtp-probe: bus: 1, device: 3 was not an MTP device
2013-12-19T21:37:09.494883+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB0): port attributes not fully set
2013-12-19T21:37:09.518071+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB2): port attributes not fully set
2013-12-19T21:37:09.531042+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB4): port attributes not fully set
2013-12-19T21:37:09.542222+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-19T21:37:09.562782+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB3): port attributes not fully set
2013-12-19T21:37:09.566146+01:00 linux-itza logger: usb_modeswitch: switched to 1c9e:9801 on 001/003
2013-12-19T21:37:12.623179+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB2): port attributes not fully set
2013-12-19T21:37:12.626227+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-19T21:37:50.101585+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB0): close blocked by driver for more than 7 seconds!
2013-12-19T21:38:26.101491+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB0): close blocked by driver for more than 7 seconds!
2013-12-19T21:38:26.104128+01:00 linux-itza ModemManager[493]: <info>  Creating modem with plugin 'Generic' and '5' ports
2013-12-19T21:38:26.141205+01:00 linux-itza ModemManager[493]: <warn>  Could not grab port (tty/ttyUSB3): 'Cannot add port 'tty/ttyUSB3', unhandled serial type'
2013-12-19T21:38:26.144627+01:00 linux-itza ModemManager[493]: <warn>  Could not grab port (tty/ttyUSB4): 'Cannot add port 'tty/ttyUSB4', unhandled serial type'
2013-12-19T21:38:26.148039+01:00 linux-itza ModemManager[493]: <warn>  Could not grab port (tty/ttyUSB0): 'Cannot add port 'tty/ttyUSB0', unhandled serial type'
2013-12-19T21:38:26.151043+01:00 linux-itza ModemManager[493]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-19T21:38:26.152791+01:00 linux-itza ModemManager[493]: <info>  Modem for device at '/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3' successfully created
2013-12-19T21:38:26.439298+01:00 linux-itza ModemManager[493]: <warn>  couldn't load Supported Modes: 'Couldn't retrieve supported modes'
2013-12-19T21:38:26.464046+01:00 linux-itza ModemManager[493]: <warn>  couldn't load Supported IP families: 'Unknown error'
2013-12-19T21:38:26.494659+01:00 linux-itza ModemManager[493]: <info>  Modem: state changed (unknown -> locked)
2013-12-19T21:38:26.593661+01:00 linux-itza ModemManager[493]: <warn>  couldn't load IMSI: 'Unknown error'
2013-12-19T21:38:26.667014+01:00 linux-itza ModemManager[493]: <warn>  couldn't load Operator identifier: 'Cannot load Operator ID without IMSI'
2013-12-19T21:38:26.759954+01:00 linux-itza ModemManager[493]: <warn>  couldn't load list of Own Numbers: 'Unknown error'
2013-12-19T21:45:01.726797+01:00 linux-itza /usr/sbin/cron[2200]: pam_unix(crond:session): session opened for user root by (uid=0)
2013-12-19T21:45:01.741549+01:00 linux-itza systemd[1]: Starting Session 3 of user root.
2013-12-19T21:45:01.750206+01:00 linux-itza systemd[1]: Started Session 3 of user root.
2013-12-19T21:45:01.893155+01:00 linux-itza /USR/SBIN/CRON[2200]: pam_unix(crond:session): session closed for user root

Gruss

Uli

wirrwarr · 20 Dez. 2013

Sorry kirasam,
jetzt muß ich langsam das Handtuch schmeißen. Was ich vielleicht noch probieren würde die Reihe der Befehle zuändern.
Z.B,

1. modprobe -v option
2. Stick einstecken und warten bis usb_modeswitch ausgeführt wird
3. modprobe -v usbserial vendor=0x1c9e product=0x9801

Es wurmt mich das wir den Fehler nicht finden. :ugly:

Laß

/var/log/messages

auf einer Konsole mit laufen. Und poste den Output von den Befehlen auch bitte.

Vorweihnachtl. Grüße
wirrwarr

kirasam · 20 Dez. 2013

Hallo wirrwarr

Die Reihenfolge hat auch keine Auswirkung

hier die Ausgabe

Code:

2013-12-20T17:44:30.689423+01:00 linux-itza su: (to uli) uli on none
2013-12-20T17:44:30.691080+01:00 linux-itza su: pam_unix(su:session): session opened for user root by (uid=1000)
2013-12-20T17:44:30.696408+01:00 linux-itza su: pam_systemd(su:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR
2013-12-20T17:44:30.734731+01:00 linux-itza su: pam_unix(su:session): session closed for user root
2013-12-20T17:44:31.023728+01:00 linux-itza su: (to uli) uli on none
2013-12-20T17:44:31.025331+01:00 linux-itza su: pam_unix(su:session): session opened for user root by (uid=1000)
2013-12-20T17:44:31.034387+01:00 linux-itza su: pam_systemd(su:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR
2013-12-20T17:45:01.403863+01:00 linux-itza /usr/sbin/cron[4352]: pam_unix(crond:session): session opened for user root by (uid=0)
2013-12-20T17:45:01.419984+01:00 linux-itza systemd[1]: Starting Session 7 of user root.
2013-12-20T17:45:01.429661+01:00 linux-itza systemd[1]: Started Session 7 of user root.
2013-12-20T17:45:01.562815+01:00 linux-itza /USR/SBIN/CRON[4352]: pam_unix(crond:session): session closed for user root
2013-12-20T17:45:22.891643+01:00 linux-itza su: (to uli) uli on none
2013-12-20T17:45:22.893582+01:00 linux-itza su: pam_unix(su:session): session opened for user root by uli(uid=1000)
2013-12-20T17:45:22.899833+01:00 linux-itza su: pam_systemd(su:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR
2013-12-20T17:45:28.055194+01:00 linux-itza kernel: [ 5422.959654] usbcore: registered new interface driver usbserial
2013-12-20T17:45:28.055301+01:00 linux-itza kernel: [ 5422.959720] usbcore: registered new interface driver usbserial_generic
2013-12-20T17:45:28.055310+01:00 linux-itza kernel: [ 5422.959765] usbserial: USB Serial support registered for generic
2013-12-20T17:45:28.078141+01:00 linux-itza kernel: [ 5422.982948] usbcore: registered new interface driver option
2013-12-20T17:45:28.086032+01:00 linux-itza kernel: [ 5422.990478] usbserial: USB Serial support registered for GSM modem (1-port)
2013-12-20T17:45:42.395032+01:00 linux-itza kernel: [ 5437.299106] usb 1-3: new high-speed USB device number 2 using ehci-pci
2013-12-20T17:45:42.513061+01:00 linux-itza kernel: [ 5437.416055] usb 1-3: New USB device found, idVendor=1c9e, idProduct=98ff
2013-12-20T17:45:42.513110+01:00 linux-itza kernel: [ 5437.416070] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-20T17:45:42.513116+01:00 linux-itza kernel: [ 5437.416078] usb 1-3: Product: USB Modem
2013-12-20T17:45:42.513122+01:00 linux-itza kernel: [ 5437.416085] usb 1-3: Manufacturer: USB Modem
2013-12-20T17:45:42.513127+01:00 linux-itza kernel: [ 5437.416091] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-20T17:45:42.569290+01:00 linux-itza mtp-probe: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-20T17:45:42.573480+01:00 linux-itza mtp-probe: bus: 1, device: 2 was not an MTP device
2013-12-20T17:45:42.638075+01:00 linux-itza kernel: [ 5437.542253] usb-storage 1-3:1.0: USB Mass Storage device detected
2013-12-20T17:45:42.645059+01:00 linux-itza kernel: [ 5437.549113] scsi6 : usb-storage 1-3:1.0
2013-12-20T17:45:42.645108+01:00 linux-itza kernel: [ 5437.549924] usb-storage 1-3:1.1: USB Mass Storage device detected
2013-12-20T17:45:42.650436+01:00 linux-itza kernel: [ 5437.552256] scsi7 : usb-storage 1-3:1.1
2013-12-20T17:45:42.650497+01:00 linux-itza kernel: [ 5437.552560] usbcore: registered new interface driver usb-storage
2013-12-20T17:45:43.510026+01:00 linux-itza usb_modeswitch: switching device 1c9e:98ff on 001/002
2013-12-20T17:45:43.652515+01:00 linux-itza kernel: [ 5438.555220] scsi 7:0:0:0: Direct-Access     USBModem Disk             2.31 PQ: 0 ANSI: 2
2013-12-20T17:45:43.654018+01:00 linux-itza kernel: [ 5438.558478] sd 7:0:0:0: Attached scsi generic sg2 type 0
2013-12-20T17:45:43.656019+01:00 linux-itza kernel: [ 5438.560585] sd 7:0:0:0: [sdb] Attached SCSI removable disk
2013-12-20T17:45:43.915829+01:00 linux-itza kernel: [ 5438.819771] usb 1-3: USB disconnect, device number 2
2013-12-20T17:45:44.228031+01:00 linux-itza kernel: [ 5439.132070] usb 1-3: new high-speed USB device number 3 using ehci-pci
2013-12-20T17:45:44.343053+01:00 linux-itza kernel: [ 5439.247685] usb 1-3: config 1 has an invalid interface number: 5 but max is 4
2013-12-20T17:45:44.343098+01:00 linux-itza kernel: [ 5439.247701] usb 1-3: config 1 has no interface number 4
2013-12-20T17:45:44.346505+01:00 linux-itza kernel: [ 5439.250299] usb 1-3: New USB device found, idVendor=1c9e, idProduct=9801
2013-12-20T17:45:44.346556+01:00 linux-itza kernel: [ 5439.250314] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-20T17:45:44.346561+01:00 linux-itza kernel: [ 5439.250321] usb 1-3: Product: USB Modem
2013-12-20T17:45:44.346567+01:00 linux-itza kernel: [ 5439.250328] usb 1-3: Manufacturer: USB Modem
2013-12-20T17:45:44.346572+01:00 linux-itza kernel: [ 5439.250334] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-20T17:45:44.394207+01:00 linux-itza kernel: [ 5439.298679] usb-storage 1-3:1.5: USB Mass Storage device detected
2013-12-20T17:45:44.401162+01:00 linux-itza kernel: [ 5439.304269] scsi8 : usb-storage 1-3:1.5
2013-12-20T17:45:44.411791+01:00 linux-itza mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-20T17:45:44.422272+01:00 linux-itza mtp-probe: bus: 1, device: 3 was not an MTP device
2013-12-20T17:45:44.726445+01:00 linux-itza logger: usb_modeswitch: switched to 1c9e:9801 on 001/003
2013-12-20T17:45:45.403697+01:00 linux-itza kernel: [ 5440.307198] scsi 8:0:0:0: Direct-Access     USBModem Disk             2.31 PQ: 0 ANSI: 2
2013-12-20T17:45:45.405123+01:00 linux-itza kernel: [ 5440.309453] sd 8:0:0:0: Attached scsi generic sg2 type 0
2013-12-20T17:45:45.408040+01:00 linux-itza kernel: [ 5440.312323] sd 8:0:0:0: [sdb] Attached SCSI removable disk

Is ja kein Problem das wir den Stick dazu bringen konnten richtig zu funktionieren .

Trotzdem vielen Dank für deine Hilfe und Geduld .

Gruss

Uli

wirrwarr · 22 Dez. 2013

Hi kirasam,
einen habe ich noch.

Code:

#TW-3G HSPA+
SUBSYSTEM=="usb", ATTRS{idVendor}=="1c9e", ATTR{idProduct}=="98ff", ACTION=="add", RUN+="/sbin/modprobe usbserial vendor=0x1c9e product=0x9801", RUN+="/usr/sbin/usb_modeswitch -v 0x1c9e -p 0x98ff -V 0x1c9e -P 0x9801 -M '55534243123456780000000080000606f50402527000000000000000000000' -n", OPTIONS+="last_rule"

In

/usr/lib/udev/rules.d/

kopierst Du bitte 40-usb_modeswitch.rules Kommentiere in der Orginaldatei die Udev-Regel für Dein Modem mit einer # aus und setze die neue Udev-Regel ganz unten ein.

Ganz fest Daumendrück wirrwarr

kirasam · 22 Dez. 2013

Hallo wirrwarr

Ich würde dir ja gerne etwas positives berichten .... aber leider leider , keine Änderung .

Gruss

Uli

wirrwarr · 22 Dez. 2013

Hi kirasam,
hast schon mal probiert usb_modeswitch und usb-modeswitch-data komplett zu deinstallieren? Wie es mit zypper geht weiß ich leider nicht. Alternative wäre Yast. Die von Dir geänderten Dateien evt. sichern. Dann beide Pakete neu mit sauberen Konfigdateien installieren.

Schöenen 4. Advent von
wirrwarr

kirasam · 22 Dez. 2013

Hallo wirrwarr

Ja , hab ich auch schon versucht .

Ändert leider nichts .

Gruss

Uli

kirasam · 22 Dez. 2013

Hallo wirrwarr

Es funktioniert

Folgendes habe ich gemacht .

Das Paket plasma-nm installiert , im gleichen Zuge wird das Paket Networkmanager-kde4-libs deinstalliert .

Allerdings funktioniert die Verbindung nur mit der Regel die du weiter oben eingestellt hast .

Wenn diese nicht vorhanden ist kommt auch keine Verbindung Zustande .

Allerdings muss ich den Pin jedesmal eingeben obwohl dieser abespeichert werden soll und ich muss die Verbindung als root freigeben obwohl eingestellt ist das jeder diese Verbindung nutzen darf .

Gruss

Uli

wirrwarr · 23 Dez. 2013

Hallo kirasam,
das ist ja klasse. Ich bin schon ganz :irre:

geworden. Wenn der Stick eingesteckt ist rufe mal

Code:

ls -ali /dev/ | grep ttyUSB*

Evtl muß die Udev-Regel noch verfeinert werden. (Zugriffsrechte). Die Pinnabfrage ist glaube ich ist normal. Bin aber nicht sicher, da ich sie schon lange am Handy abgestellt habe.

Viele Grüße
wirrwarr

kirasam · 23 Dez. 2013

Hallo wirrwarr

hier die Ausgabe von

ls -ali /dev/ | grep ttyUSB*

Code:

uli@linux-itza:~>     ls -ali /dev/ | grep ttyUSB*
21603 lrwxrwxrwx   1 root root           7 23. Dez 15:40 gsmmodem -> ttyUSB1
21530 crw-rw----   1 root dialout 188,   0 23. Dez 15:41 ttyUSB0
21531 crw-rw----   1 root dialout 188,   1 23. Dez 15:42 ttyUSB1
21532 crw-rw----   1 root dialout 188,   2 23. Dez 15:44 ttyUSB2
21533 crw-rw----   1 root dialout 188,   3 23. Dez 15:41 ttyUSB3
uli@linux-itza:~>

Gruss

Uli

EDIT :

richtig rund läufts noch nicht , es dauert ca. 5 Minuten bis die Verbindung angezeigt wird und ich connecten kann .

Ausgabe von

var/log/messages

Code:

2013-12-23T18:12:54.727054+01:00 linux-itza kernel: [  487.632053] usb 1-3: new high-speed USB device number 3 using ehci-pci
2013-12-23T18:12:54.844070+01:00 linux-itza kernel: [  487.748986] usb 1-3: New USB device found, idVendor=1c9e, idProduct=98ff
2013-12-23T18:12:54.844115+01:00 linux-itza kernel: [  487.748997] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-23T18:12:54.844121+01:00 linux-itza kernel: [  487.749028] usb 1-3: Product: USB Modem
2013-12-23T18:12:54.844126+01:00 linux-itza kernel: [  487.749035] usb 1-3: Manufacturer: USB Modem
2013-12-23T18:12:54.844131+01:00 linux-itza kernel: [  487.749041] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-23T18:12:54.893062+01:00 linux-itza kernel: [  487.798788] usb-storage 1-3:1.0: USB Mass Storage device detected
2013-12-23T18:12:54.895337+01:00 linux-itza kernel: [  487.800659] scsi7 : usb-storage 1-3:1.0
2013-12-23T18:12:54.895384+01:00 linux-itza kernel: [  487.801102] usb-storage 1-3:1.1: USB Mass Storage device detected
2013-12-23T18:12:54.897069+01:00 linux-itza kernel: [  487.802984] scsi8 : usb-storage 1-3:1.1
2013-12-23T18:12:54.905827+01:00 linux-itza mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-23T18:12:54.909440+01:00 linux-itza mtp-probe: bus: 1, device: 3 was not an MTP device
2013-12-23T18:12:54.964138+01:00 linux-itza kernel: [  487.869790] usbcore: registered new interface driver usbserial
2013-12-23T18:12:54.966079+01:00 linux-itza kernel: [  487.871252] usbcore: registered new interface driver usbserial_generic
2013-12-23T18:12:54.966125+01:00 linux-itza kernel: [  487.871321] usbserial: USB Serial support registered for generic
2013-12-23T18:12:55.253066+01:00 linux-itza kernel: [  488.158690] usb 1-3: usbfs: process 1381 (usb_modeswitch) did not claim interface 0 before use
2013-12-23T18:12:55.656482+01:00 linux-itza kernel: [  488.561950] usb 1-3: USB disconnect, device number 3
2013-12-23T18:12:55.971047+01:00 linux-itza kernel: [  488.876064] usb 1-3: new high-speed USB device number 4 using ehci-pci
2013-12-23T18:12:56.086424+01:00 linux-itza kernel: [  488.991531] usb 1-3: config 1 has an invalid interface number: 5 but max is 4
2013-12-23T18:12:56.086466+01:00 linux-itza kernel: [  488.991545] usb 1-3: config 1 has no interface number 4
2013-12-23T18:12:56.090076+01:00 linux-itza kernel: [  488.994281] usb 1-3: New USB device found, idVendor=1c9e, idProduct=9801
2013-12-23T18:12:56.090122+01:00 linux-itza kernel: [  488.994291] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4
2013-12-23T18:12:56.090127+01:00 linux-itza kernel: [  488.994299] usb 1-3: Product: USB Modem
2013-12-23T18:12:56.090132+01:00 linux-itza kernel: [  488.994306] usb 1-3: Manufacturer: USB Modem
2013-12-23T18:12:56.090138+01:00 linux-itza kernel: [  488.994312] usb 1-3: SerialNumber: 1234567890ABCDEF
2013-12-23T18:12:56.135897+01:00 linux-itza kernel: [  489.040702] usbserial_generic 1-3:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-23T18:12:56.135946+01:00 linux-itza kernel: [  489.040714] usbserial_generic 1-3:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-23T18:12:56.135952+01:00 linux-itza kernel: [  489.040721] usbserial_generic 1-3:1.0: generic converter detected
2013-12-23T18:12:56.135958+01:00 linux-itza kernel: [  489.041344] usb 1-3: generic converter now attached to ttyUSB0
2013-12-23T18:12:56.135962+01:00 linux-itza kernel: [  489.041629] usbserial_generic 1-3:1.1: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-23T18:12:56.135968+01:00 linux-itza kernel: [  489.041636] usbserial_generic 1-3:1.1: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-23T18:12:56.135973+01:00 linux-itza kernel: [  489.041642] usbserial_generic 1-3:1.1: generic converter detected
2013-12-23T18:12:56.137467+01:00 linux-itza kernel: [  489.042671] usb 1-3: generic converter now attached to ttyUSB1
2013-12-23T18:12:56.137491+01:00 linux-itza kernel: [  489.043046] usbserial_generic 1-3:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-23T18:12:56.137497+01:00 linux-itza kernel: [  489.043054] usbserial_generic 1-3:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-23T18:12:56.137503+01:00 linux-itza kernel: [  489.043060] usbserial_generic 1-3:1.2: generic converter detected
2013-12-23T18:12:56.138643+01:00 linux-itza kernel: [  489.044067] usb 1-3: generic converter now attached to ttyUSB2
2013-12-23T18:12:56.138664+01:00 linux-itza kernel: [  489.044381] usbserial_generic 1-3:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
2013-12-23T18:12:56.138670+01:00 linux-itza kernel: [  489.044388] usbserial_generic 1-3:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
2013-12-23T18:12:56.138675+01:00 linux-itza kernel: [  489.044394] usbserial_generic 1-3:1.3: generic converter detected
2013-12-23T18:12:56.139347+01:00 linux-itza kernel: [  489.045232] usb 1-3: generic converter now attached to ttyUSB3
2013-12-23T18:12:56.141092+01:00 linux-itza kernel: [  489.045944] usb-storage 1-3:1.5: USB Mass Storage device detected
2013-12-23T18:12:56.146064+01:00 linux-itza kernel: [  489.050052] scsi9 : usb-storage 1-3:1.5
2013-12-23T18:12:56.157867+01:00 linux-itza mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3"
2013-12-23T18:12:56.164177+01:00 linux-itza mtp-probe: bus: 1, device: 4 was not an MTP device
2013-12-23T18:12:56.482938+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB0): port attributes not fully set
2013-12-23T18:12:56.488503+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB2): port attributes not fully set
2013-12-23T18:12:56.506465+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB3): port attributes not fully set
2013-12-23T18:12:56.516675+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:12:57.149136+01:00 linux-itza kernel: [  490.053311] scsi 9:0:0:0: Direct-Access     USBModem Disk             2.31 PQ: 0 ANSI: 2
2013-12-23T18:12:57.151032+01:00 linux-itza kernel: [  490.056250] sd 9:0:0:0: Attached scsi generic sg2 type 0
2013-12-23T18:12:57.156020+01:00 linux-itza kernel: [  490.061174] sd 9:0:0:0: [sdb] Attached SCSI removable disk
2013-12-23T18:12:59.800422+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB2): port attributes not fully set
2013-12-23T18:12:59.809946+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:13:37.098526+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB0): close blocked by driver for more than 7 seconds!
2013-12-23T18:14:13.099453+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB0): close blocked by driver for more than 7 seconds!
2013-12-23T18:14:13.102212+01:00 linux-itza ModemManager[497]: <info>  Creating modem with plugin 'Generic' and '4' ports
2013-12-23T18:14:13.133654+01:00 linux-itza ModemManager[497]: <warn>  Could not grab port (tty/ttyUSB3): 'Cannot add port 'tty/ttyUSB3', unhandled serial type'
2013-12-23T18:14:13.137102+01:00 linux-itza ModemManager[497]: <warn>  Could not grab port (tty/ttyUSB0): 'Cannot add port 'tty/ttyUSB0', unhandled serial type'
2013-12-23T18:14:13.140643+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:14:13.145645+01:00 linux-itza ModemManager[497]: <info>  Modem for device at '/sys/devices/pci0000:00/0000:00:13.5/usb1/1-3' successfully created
2013-12-23T18:14:13.430664+01:00 linux-itza ModemManager[497]: <warn>  couldn't load Supported Modes: 'Couldn't retrieve supported modes'
2013-12-23T18:14:13.455270+01:00 linux-itza ModemManager[497]: <warn>  couldn't load Supported IP families: 'Unknown error'
2013-12-23T18:14:13.485940+01:00 linux-itza ModemManager[497]: <info>  Modem: state changed (unknown -> locked)
2013-12-23T18:14:13.587191+01:00 linux-itza ModemManager[497]: <warn>  couldn't load IMSI: 'Unknown error'
2013-12-23T18:14:13.662699+01:00 linux-itza ModemManager[497]: <warn>  couldn't load Operator identifier: 'Cannot load Operator ID without IMSI'
2013-12-23T18:14:13.752423+01:00 linux-itza ModemManager[497]: <warn>  couldn't load list of Own Numbers: 'Unknown error'
2013-12-23T18:14:35.645577+01:00 linux-itza polkitd[567]: Operator of unix-session:1 successfully authenticated as unix-user:root to gain TEMPORARY authorization for action org.freedesktop.ModemManager1.Device.Control for system-bus-name::1.12 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:uli)
2013-12-23T18:14:35.648034+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:14:38.097348+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:14:38.119909+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (locked -> initializing)
2013-12-23T18:14:38.133334+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:14:38.839049+01:00 linux-itza ModemManager[497]: <warn>  couldn't load list of Own Numbers: 'SIM busy'
2013-12-23T18:14:39.336412+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (initializing -> disabled)
2013-12-23T18:15:01.571536+01:00 linux-itza /usr/sbin/cron[1426]: pam_unix(crond:session): session opened for user root by (uid=0)
2013-12-23T18:15:01.583153+01:00 linux-itza systemd[1]: Starting user-0.slice.
2013-12-23T18:15:01.584666+01:00 linux-itza systemd[1]: Created slice user-0.slice.
2013-12-23T18:15:01.600419+01:00 linux-itza systemd[1]: Starting User Manager for 0...
2013-12-23T18:15:01.637424+01:00 linux-itza systemd[1]: Starting Session 2 of user root.
2013-12-23T18:15:01.644667+01:00 linux-itza systemd[1]: Started Session 2 of user root.
2013-12-23T18:15:01.666497+01:00 linux-itza systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0)
2013-12-23T18:15:01.683426+01:00 linux-itza systemd[1427]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
2013-12-23T18:15:01.721272+01:00 linux-itza systemd[1427]: Stopped target Sound Card.
2013-12-23T18:15:01.723183+01:00 linux-itza systemd[1427]: Starting Default.
2013-12-23T18:15:01.724320+01:00 linux-itza systemd[1427]: Reached target Default.
2013-12-23T18:15:01.725341+01:00 linux-itza systemd[1427]: Startup finished in 48ms.
2013-12-23T18:15:01.728351+01:00 linux-itza systemd[1]: Started User Manager for 0.
2013-12-23T18:15:01.850634+01:00 linux-itza /USR/SBIN/CRON[1426]: pam_unix(crond:session): session closed for user root
2013-12-23T18:15:23.590769+01:00 linux-itza ModemManager[497]: <info>  Simple connect started...
2013-12-23T18:15:23.597454+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (3/8): Enable
2013-12-23T18:15:23.601299+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
2013-12-23T18:15:23.618614+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB1): port attributes not fully set
2013-12-23T18:15:23.624169+01:00 linux-itza ModemManager[497]: <warn>  (ttyUSB2): port attributes not fully set
2013-12-23T18:15:23.966009+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
2013-12-23T18:15:24.056103+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
2013-12-23T18:15:24.091656+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: '65E', Cell ID: '5EA2A78')
2013-12-23T18:15:24.120249+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '262', MNC: '2', Location area code: '65E', Cell ID: '5EA2A78')
2013-12-23T18:15:24.439069+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
2013-12-23T18:15:24.439941+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (4/8): Wait to get fully enabled
2013-12-23T18:15:24.443559+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (5/8): Register
2013-12-23T18:15:24.444687+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (6/8): Bearer
2013-12-23T18:15:24.447890+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (7/8): Connect
2013-12-23T18:15:24.450501+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting)
2013-12-23T18:15:24.470205+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (60)
2013-12-23T18:15:24.520153+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
2013-12-23T18:15:24.520866+01:00 linux-itza ModemManager[497]: <info>  Simple connect state (8/8): All done
2013-12-23T18:15:24.681608+01:00 linux-itza pppd[1451]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
2013-12-23T18:15:24.735584+01:00 linux-itza kernel: [  637.640103] PPP generic driver version 2.4.2
2013-12-23T18:15:24.737612+01:00 linux-itza pppd[1451]: pppd 2.4.5 started by root, uid 0
2013-12-23T18:15:24.760485+01:00 linux-itza pppd[1451]: Using interface ppp0
2013-12-23T18:15:24.761230+01:00 linux-itza pppd[1451]: Connect: ppp0 <--> /dev/ttyUSB1
2013-12-23T18:15:24.783401+01:00 linux-itza pppd[1451]: CHAP authentication succeeded
2013-12-23T18:15:24.814028+01:00 linux-itza kernel: [  637.719401] PPP BSD Compression module registered
2013-12-23T18:15:24.846028+01:00 linux-itza kernel: [  637.751458] PPP Deflate Compression module registered
2013-12-23T18:15:24.784123+01:00 linux-itza pppd[1451]: CHAP authentication succeeded
2013-12-23T18:15:27.572841+01:00 linux-itza pppd[1451]: Could not determine remote IP address: defaulting to 10.34.24.64
2013-12-23T18:15:27.573559+01:00 linux-itza pppd[1451]: local  IP address 109.41.236.67
2013-12-23T18:15:27.575098+01:00 linux-itza pppd[1451]: remote IP address 10.64.84.64
2013-12-23T18:15:27.576776+01:00 linux-itza pppd[1451]: primary   DNS address 119.7.20.126
2013-12-23T18:15:27.578124+01:00 linux-itza pppd[1451]: secondary DNS address 119.7.70.125
2013-12-23T18:15:28.326442+01:00 linux-itza SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
2013-12-23T18:15:28.344651+01:00 linux-itza SuSEfirewall2: using default zone 'ext' for interface ppp0
2013-12-23T18:15:28.354543+01:00 linux-itza SuSEfirewall2: using default zone 'ext' for interface wlp2s0
2013-12-23T18:15:28.666861+01:00 linux-itza SuSEfirewall2: Firewall rules successfully set
2013-12-23T18:15:28.679330+01:00 linux-itza pppd[1451]: Script /etc/ppp/ip-up finished (pid 1469), status = 0x0
2013-12-23T18:15:28.686761+01:00 linux-itza dbus[495]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
2013-12-23T18:15:28.702422+01:00 linux-itza systemd[1]: Starting Network Manager Script Dispatcher Service...
2013-12-23T18:15:28.735407+01:00 linux-itza dbus[495]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
2013-12-23T18:15:28.738295+01:00 linux-itza systemd[1]: Started Network Manager Script Dispatcher Service.
2013-12-23T18:15:55.134143+01:00 linux-itza ModemManager[497]: <info>  Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (60)
2013-12-23T18:18:32.430058+01:00 linux-itza su: pam_unix(su:session): session closed for user root
2013-12-23T18:19:47.095098+01:00 linux-itza systemd[1]: Starting Cleanup of Temporary Directories...
2013-12-23T18:19:47.107841+01:00 linux-itza systemd-tmpfiles[1821]: stat(/run/user/1000/gvfs) failed: Permission denied
2013-12-23T18:19:47.310562+01:00 linux-itza systemd[1]: Started Cleanup of Temporary Directories.
2013-12-23T18:21:03.955960+01:00 linux-itza su: (to uli) uli on none
2013-12-23T18:21:03.960418+01:00 linux-itza su: pam_unix(su:session): session opened for user root by (uid=1000)
2013-12-23T18:21:03.967214+01:00 linux-itza su: pam_systemd(su:session): pam_putenv: delete non-existent entry; XDG_RUNTIME_DIR

josef-wien · 23 Dez. 2013

kirasam schrieb:
ich muss die Verbindung als root freigeben

Ist dem Benutzer die Gruppe dialout zugeordnet?

wirrwarr · 24 Dez. 2013

josef-wien schrieb:
kirasam schrieb:

ich muss die Verbindung als root freigeben

Zum Vergrößern anklicken....

Ist dem Benutzer die Gruppe dialout zugeordnet?

Ja

http://www.linux-club.de/viewtopic.php?f=92&t=118587&start=20#p752306
@kirasam, gibt es das Programm

nm-connection-editor

bei Dir?Ruf das mal mit

Code:

kdesu nm-connection-editor

auf und gib Deine Verbindung nochmal für alle Benutzer frei.

Code:

nmcli con

und

Code:

nmcli dev

nochmal bitte.

Frohe Weihnachten.

kirasam · 24 Dez. 2013

Hallo wirrwarr

Das Programm habe ich nicht auf meinem Rechner und kann es auch nicht finden über yast / software installieren .

Gruss

Uli

EDIT :

Heute ist es zwei mal vorgekommen das die Verbindung unterbrochen wurde .

Die Verbindung konnte nicht wieder aufgebaut werden weil der Punkt " mobiles Breitband " nicht mehr angezeigt wurde .

Ein ab und wieder anstecken des Sticks brachte kein Erfolg , lediglich ein Neustart .

wirrwarr · 25 Dez. 2013

kirasam schrieb:
Heute ist es zwei mal vorgekommen das die Verbindung unterbrochen wurde .
Die Verbindung konnte nicht wieder aufgebaut werden weil der Punkt " mobiles Breitband " nicht mehr angezeigt wurde .
Ein ab und wieder anstecken des Sticks brachte kein Erfolg , lediglich ein Neustart .

Das Problem habe ich auch gelegentlich. Ich steck den Stick neu ein und starte den Netzwerkdämon neu.
kannst Du Du Ausgaben von den

nmcli Befehlen

reinstellen?

Code:

nm-connection-editor

scheint in einem Gnomepaket zu stecken. Ich weiß leider nicht wie das Kde-Pendant heißt.

Frohe Weihnachten von
wirrwarr

kirasam · 25 Dez. 2013

Hallo wirrwarr

Betr. nmcli Befehle , welche soll ich hier reinstellen ?

Betr. nm-connection-manager guck ich mal

Gruss

Uli

wirrwarr · 26 Dez. 2013

kirasam schrieb:
Betr. nmcli Befehle , welche soll ich hier reinstellen ?

Diese da http://www.linux-club.de/posting.php?mode=quote&f=92&p=752802#pr752778

Tschau wirrwarr

mrehm · 26 Dez. 2013

kirasam hat geschrieben

Das Paket plasma-nm installiert , im gleichen Zuge wird das Paket Networkmanager-kde4-libs deinstalliert .

Dann installiere mal das Paket

plasmoid-networkmanagement - NetworkManager client for KDE 4

Beschreibung

Network Management Plasma applet for controlling network connections on systems that use the NetworkManager service.

Notwendig ist dann auch das bei Dir deinstallierte Paket

NetworkManager-kde4-libs - NetworkManager client for KDE 4

Beschreibung

Support libraries for the Network Management plasmoid Network Management Plasmoid is a KDE 4 applet and connection editor for controlling network connections on systems that use the NetworkManager service

und auch

NetworkManager - Network Link Manager and User Applications

Beschreibung

NetworkManager attempts to keep an active network connection available at all times. The point of NetworkManager is to make networking configuration and setup as painless and automatic as possible. If using DHCP, NetworkManager is intended to replace default routes, obtain IP addresses from a DHCP server, and change name servers whenever it sees fit.

Findest Du alles per Yast > Software installieren > Suche > networkmanager
Das applet solltest Du spaetestens nach Neuanmeldung in deiner taskleiste finden, rechts neben dem Lautstaerkeregler - manchmal ist es unsichtbar, einfach auf die Stelle klicken.

Viel Glueck
Martin

wirrwarr · 27 Dez. 2013

Hallo kirasam,
wenn Du die Pakete installierst, die mrehm vorschlägt, dann setzte lieber die

Code:

/lib/udev/rules.d/40-usb_modeswitch.rules

wieder auf Anfang. Also die neue Regel mit # auskommentieren und bei der Orginalregel # löschen.

Ebenfalls viel Glück von
wirrwarr

kirasam · 30 Dez. 2013

Hallo zusammen

Hat ein bisschen gedauert ... war etwas beschäftigt

Ausgabe nmcli-Befehle

http://nopaste.info/c349d89428.html

plasmoid-networkmanagement - NetworkManager client for KDE 4

Network Management Plasma applet for controlling network connections on systems that use the NetworkManager service.

Kann ich nicht finden unter software installieren

Wenn ich NetworkManager client for KDE 4 auswähle wird plasma-nm deinstalliert und die Verbindung funktioniert dann wieder nicht .

Gruss

Uli

wirrwarr · 30 Dez. 2013

Hi kirasam,
versuchen wir es über die Konsole. Verbindungsaufbau:

Code:

nmcli con up iface ttyUSB1 uuid a4bffe83-a336-4c70-bcf5-c99d07c570f7

Sollte das nicht funktionieren

Code:

nmcli nm wwan on

Danach den 1. Befehl nochmals eingeben.

Viele Grüße wirrwarr

[ gelöst ] UMTS stick Suse 13.1 umtsmon

Member

Hacker

Member

Hacker

Member

Hacker

Member

Member

Hacker

Member

Ultimate Guru

Hacker

Member

Hacker

Member

Hacker

Hacker

Hacker

Member

Hacker